SANOVIT can be spread and calibrated like a mineral fertilizer. It should be worked into the root-zone.

• For area treatment a quantity from 200gram up to 1kg SANOVIT (500g - 3kg SANOVIT Bio) per square meter should be worked into minimum 10cm depth up to 20cm depth. Quantity is depending on soil type and intended effects.
• In planting pits quantity of application can be from minimum 2kg up to 5kg per m³ (SANOVIT Bio 6kg - 10kg per m³) pre mixed soil or substrate.
• In big planting  pits it is also possible to mix only the bottom of hole with SANOVIT (spades depth) maximum 5kg per m².
• For germination purpose and in very small plant pots a ratio of up to 1part soil or substrate and 1 part SANOVIT can be considered.

Use in "problem areas":

Such as e.g.lawn that is suffering from compaction or at the other hand if water permeability is too high.

SANOVIT can be sprayed and worked in to maximum spade’s depth.

Recommended quantity: 1kg SANOVIT per m²

For more detailed information please go to the download area.